Optional extras.
A wide range of optional extras are available as shown in the list below, at additional cost.
1. Louvre Window
5-blade louvre, including glass for extra light and ventilation. Available in Zinc or 'Smooth Cream' Color.
Dimensions: 700mm high x 580mm wide.
2. Polycarbonate Window
Virtually unbreakable fixed polycarbonate window for extra light, usually in smaller size sheds.
Dimensions: 700mm wide x 300mm high.
3. Skylight
Ampelite 'Wonderglas' Six-Rib profile to match profile of shed cladding.
Dimensions: 750mm wide, roof ridge to eaves
4. Shelf Kit
Includes 2 shelf brackets and 3 shelves. Shelf brackets can also be supplied separately.
Dimensions: 900mm high x 900mm wide x 230mm deep.
5. Extra Door
Extra door – Allows for additional entry point – particularly useful in the larger Gable, Truss Roof range.
6. Double Door
Double Door – available in opening sizes of 1.5m (standard) or 1.8m, and can be placed in 3.0m or 3.75m panels. It should be noted that for structural reasons Double Doors cannot be placed at the midpoint of the long wall of a Gable, Truss shed.
7. Extra Wall Height
Extra height walls – The standard minimum wall height is 1830mm, but units can be supplied with minimum wall heights of either 1960mm or 2100mm to provide extra headroom and storage space.
8. Color trim
Color Trim - All channels, flashing and trim can be supplied in 'Smooth Cream' Color instead of the standard Galvanised finish. Colour trim is standard on Chalet range.
9. Security Kit
Doors and jambs reinforced with square galvanised tube; centre-locking T-handle with 2 keys.
10. Vents
Fixed louvre panel for ventilation, particularly useful in pump sheds and chemical store.
Dimensions: 250mm high x 700mm wide.
11. Sliding Doors
Sliding doors – Single or double sliding doors can be fitted to provide for situations where space is limited. These are supplied with a locking latch and 2 keys. There are some structural limitations to this option on small sheds.
12. Partitions
Extra panels supplied to divide sheds or aviaries into two or more spaces. These can be solid, or can include doors or wire mesh sections if required.
13. Variations to standard
Many modifications can be incorporated into the standard units – discuss this with your retailer, or contact us.
© 2009
